|
| |
| Welcome to our Store. |
| Free Shipping on orders totaling over $60.00 |
| Note: These are prices for shipment in the Continental US. Additional Shipping charges will be calculated for international orders. |
  |
 |
Don't
have a PayPal account? Use your credit or debit
card to pay.
 |
|
|
Due to the increase in our tool sales over the past year, we are now able to purchase a higher volume of raw materials and outsource some of our products resulting in a lower manufacturing cost on certain items. We're happy to pass these savings along to our customers and our prices now reflect these savings.
 |
EZWrap Pro Utility Installer.
Comfortable in your hand and easy to use. Crafted from the same aircraft grade T-6 aluminum as our other EZWrap Pro installers, with a solid 1" aluminum hub supporting the high density foam roller, this is a tool that can be used in a variety of circumstances during your installation. Used with a heat gun or torch, it can lay down rivet lines, and the side axle support design allows it to snug up next to an edge to complete a rivet line or just secure the vinyl at a corner edge without the supports hitting the side walls or scratching the vinyl. The handle can be used to hang it in your pocket when not in use. Now the EZWrap Pro Utility comes with one GeekWraps® 4 Inch Soft Edge Squeegee.
Replacement roller (sold separately) includes the solid aluminum hub and the slide on -not in use- roller protective cover.
Watch the video
|
|
|
 |
Soft Edge Super Squeegee.
Developed over 5 years ago for use with digital graphics, the Soft Edge Super Squeegee edge glides over graphics like no other. It won't heat
up or stick and is rated for up to 400,000 rubs. It's also great for all other types of vinyl installation as it absorbs water from the edges for a fast clean
install. (4" squeegees are sold in quantity of 10 only)
|
|
|
|
 |
Detail Squeegees.
The same quality and design as our Soft Edge Super Squeegee, these detail squeegees are a must have for finishing all the fine areas of your wrap. For use around window corners, door handles, etc., any area that may
be too small for a traditional-sized squeegee.
|
|
|
|
 |
Double Edge Soft Edge Super Squeegee.
When you thought the Geek Wraps Squeegee couldnʼt get any better! The double soft edge allows you to apply lots of pressure when wrapping without putting undo stress on your hands, especially useful for view thru window perf.
And it doubles the rubs as well (now a whopping 800,000 rubs!). A new staple to add to your box.
|
|
|
 |
Teflon Squeegee.
Geek Wraps hard edge teflon squeegee has smooth hard edges. Long lasting squeegee glides across graphics working exceptionally well in grooves and on edges as well as with cut vinyl applied with application tape. Standard 4 Inch Size.
|
|
|
 |
Teflon Detail Squeegees.
Geek Wraps hard edge teflon detail squeegees have smooth hard edges and are a valuable tool for finishing all the fine areas of your wrap. For use around window corners, door handles, etc., any area that may be too small for a traditional-sized squeegee..
|
|
|
 |
Power Slam Magnets.
The Power Slam Magnet is being acclaimed as an indispensable tool when installing vehicle wraps. Each magnet alone has the strength to hold 110 SF of media on the vertical drop, and boasts 18x the strength of a regular magnet of its size. Each Power Slam Magnet is enclosed in a polypropylene interior sheath with a genuine leather outer casing to prevent scratching or damaging your graphics or the vehicle. The clear advantage to using Power Slam Magnet is the decrease in bodies needed on each install, while increasing efficiency to output the installations in record time with complete accurate lineup.
|
|
|
 Made in the USA, Patent Pending. |
EZ Wrap Pro.
Invented by Geek Wraps specialty wrap tool development engineer, and tested in the field for 3 years, this revolutionary new tool will lay down your wrap over rivets and textured surfaces in record time. One hand, two motions; heat and roll. You'll never look at rivets and wall wraps the same way again. Think of it as a portable hand laminator, like used in many of your shops, it uses a rubber roller allowing you to apply adhesive backed vinyls to vertical substrates.
The EZ Wrap Pro is precision CNC milled from aircraft grade T-6 aluminum, a solid 1" aluminum hub supports the high density foam roller which is attached with a hardened steel axle. The tool slips onto an industry standard quick fire tank and tightens in place with a hardened steel bolt. Small and medium tools fit the convenient 5.45 oz. tank, the large is made to fit the full size 16.92 oz. tank.
Lightweight and easy to handle, the small size works great for all those normal size rivets on box trucks and aluminum trailers. Choose the medium tool for larger rivets, covering emblems, textured areas, moldings, etc. Pull out the large and get it all done, heat and roll protrusions and obstacles on RV's and other vehicles, then take it to the textured indoor/outdoor walls and put banner size wraps directly on knockdown, stucco, cinderblock, brick, etc. (Torch and tank not included, sold separately at your local home center or hardware store) |
Watch the video
|
|
|
 Made in the USA, Patent Pending. |
Replacement Rollers.
Replacement Rollers for the EZ Wrap Pro include the solid 1" aluminum hub and the slide on -not in use- roller protective cover which also doubles as a helpful spacer while installing the tool on your gas tank.
Watch the rivet installation video
|
|
|
 |
Wrap Juice.
Wrap Juice will eliminate abrasiveness and allow your fingers to glide easily and effortlessly over warmed wrap vinyl while pressing and setting the vinyl to the surfaces. By using this technique, it is possible to read the vinyl and feel any wrinkles or bubbles developing and work them out before folding or wrinkling the warm vinyl. By laying it on in one shot and not having to lift and reapply, it keeps the vinyl from overworking and losing its' adhesive quality and memory shape. It is best used while installing high quality cast vinyl with an air egress glue system in complex areas. Also works great with reflective cast installations. Comes equipped with a soft edge micro detail squeegee.Be sure to check out our complex area wrap series tutorial videos from the training link at the top of this page for several methods using Geek Wraps Wrap Juice.
|
|
|
 |
Power Slam Tape.
The Geek Wraps Power Slam Tape is by far the fastest, easiest way to measure a car. A full 120 inch tailors tape with power slam magnets on each end allows one person the measure a complete metal vehicle (or any metal object) accurately and effortlessly. Easily finds exact center points of any substrate in 2 steps, also useful to find spot on leveling lines for your content. The magnets on the Power Slam Tape are enclosed in layers of vinyl coated fiberglass and genuine leather casing to ensure the magnet has no direct contact with your painted metal surface. Simplistic in design with superior results, the Power Slam Tape is sure to become a staple in your shop. The PST will measure up to your expectations!
|
|
|
 |
Geek Wraps Tailors Tape.
Tailors tape, flexible non-stretch, 5/8 inch (16mm) wide fiberglass fabric with metal end pieces. Inches only on one side (down to 1/8 inch) and inches and metric on the other. Great measuring tool for car wraps especially on non-metallic surfaces such as fiberglass and gel coat.
|
|
|
 |
Emblem Removal Tool.
Geek Wraps Emblem Removal Tool is a simple, useful tool that you will reach for on all your wraps. It will slice thru the foam tape that hold the emblems without destroying the emblem or damaging the paint,
leaving only a small amount of residue to clean off. Used on all our wraps and featured in our videos, add this to your own wrap toolkit.
|
|
|
|
|
 |
Cherry Weights. Buy yourself an extra set of hands. Cherry weights are custom hand-made from high grade cowhide, filled with lead and finished with our signature strapping. They run approximately 11inch length with a 6inch diameter and a hefty 6 lbs each. These custom weights will have custom uses in your shop. Hold the vinyl while you tighten your rolls of printed media before laminating. Hold your vinyl firmly in place on the table while you cut, trim, tile or weed. Use them to keep your print on the table and off the floor as it comes out of the printer. Keep your rolled prints from unrolling onto the floor. Wrapping a fiberglass hood? Line up your graphic and hold it in place while you stick the starting point of the vinyl. Whenever you need another hand or helper, grab a Cherry Weight.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One (1) soft edge super squeegee
Contact phone: [954] 783 3117